Shaker Door Front

Measurements are communicated in Width x Height in inches, rounded to the nearest 1/16” (.0625). Use the Conversion Table for assistance converting inches to decimals.

Width must be greater than 6” and less than 48”.
Height must be greater than 6” and less than 96”. Warranted to 31" x 60"

• Width *

  Min: 6Max: 48

• Height *

  Min: 6Max: 96

• Square Feet *

• Price - Minimum *

• Price Calculated *

• Weight (kg) *

Our Fronts are pre-drilled for hinges to save you time. Select a hinge pattern based on the distance from the top and bottom edge of the door. The 3" pattern (HB1) is most common. Note: Doors less than 12” tall will include 2 hinge bores located 2” from top and bottom edge.

• Hinge Bore Pattern *

  

  2.5 Pattern (HB7)
  Face Frame PatternHB7 - Pattern 7

  

  3 Pattern (HB1)
  Face Frame PatternHB1 - Pattern 1

  

  3.625 Pattern (HB5)
  Face Frame PatternHB5 - Pattern 5

  

  3.625 Pattern (HB3)
  Frameless PatternHB3 - Pattern 3

Don't forget to add hinges. All doors will need a minimum of 2 hinges. Door heights between 36" up to 60" require 3 hinges and doors that are over 60" require 4 hinges. Choose from 1/2” overlay or 1-1/4” overlay. This will match the overlay formula you used when measuring your doors. Most DIYers select 1/2” overlay, click here to view tutorials.

• Hinge Options *

  

  Soft Close Hinge – 1/2″ Overlay + $2.75

  

  Soft Close Hinge – 1-1/4″ Overlay + $2.75

Label each cabinet as you measure (e.g. Upper 1, Lower 1) and include here. This note will be printed on your product label and you can use it to organize your order for faster installation.

• Label Note *

  Max: 50 characters